ZyXEL NSA-220 Uživatelský manuál Strana 69

  • Stažení
  • Přidat do mých příruček
  • Tisk
  • Strana
    / 192
  • Tabulka s obsahem
  • ŘEŠENÍ PROBLÉMŮ
  • KNIHY
  • Hodnocené. / 5. Na základě hodnocení zákazníků
Zobrazit stránku 68
Chapter 6 Storage Screens
NSA-220 User’s Guide
69
If you do not want to keep the data on a disk that you will remove, it is recommended that you
delete the volume before you remove the disk. If you remove a disk(s) without deleting its
volume and you later put the disk(s) back in a different volume, you may have more than one
volume with the same name. For example, suppose you have two disks, Disk A and Disk B
and you create two JBOD volumes, volume1 (with Disk A) and volume2 (Disk B). Later you
remove Disk A and replace it with another disk, Disk C and you re-create volume1. (You did
not delete volume1 when you removed Disk A.) Later you replace Disk B with Disk A. Disk A
still retains the volume1 label, so at this point both Disk A and Disk C have the volume1 label.
Although you can still use the volumes, you may find the naming confusing.
6.6 Creating a New Internal Volume
Click the Create a New Internal Volume button in the Volume screen as shown in Figure 38
on page 61 to create a new NSA internal disk drive volume.
" Creating a volume formats the hard drive. All data on the disk will be lost.
Figure 40 Create a New Internal Volume
The following table describes the labels in this screen.
Table 19 Create a New Internal Volume
LABEL DESCRIPTION
System Performance
(RAID 0)
Use RAID 0 if you want maximum speed for your disks, and/or you have
other means of protecting your data. This is only available when you have
two hard disks installed.
Data Protection (RAID 1) Use RAID 1 if you want to mirror all data on one disk to the other disk.
This is only available when you have two hard disks installed.
Disk Capacity (JBOD) Use JBOD if you want maximum storage capacity and/or you have other
means of protecting your data. JBOD is the only option if you only have
one disk installed.
Volume will be created on This field lists all hard disks installed inside the NSA. Select which disks
should make up this volume. A disk can only belong to one volume. You
do not need to select anything if only one hard disk is installed.
Zobrazit stránku 68
1 2 ... 64 65 66 67 68 69 70 71 72 73 74 ... 191 192

Komentáře k této Příručce

Žádné komentáře