ZyXEL ACCESSING INTERNET & INTRANET omni series Uživatelský manuál stáhnout pdf (Strana 100)

88 Advanced ISDN Call Control

[FM:[[Prefix]Calling-Party-Number][/Subaddress/]]

[TO:[Called-Party-Number][/Subaddress/]] <CR><LF>

RING <CR><LF>

......

The display of address information between the first RING and the

second RING can be disabled by setting ATS84.4=1. The term

[Prefix] is a predefined number string to be added in front of the

Calling-party-number before sending it to the DTE. This is useful for

some automatic dial-back-up systems. The number string can be

assigned as follows:

•

ATCI<Prefix> - When and only when the type-of-number

denotes an international number will this "Prefix" be added to the

Calling-party-number before indicating it to the DTE.

• ATCI<> - Disables the international number prefix-adding

function. (Default)

• ATCN<Prefix> - When and only when the type-of-number

denotes a national number will this "Prefix" be added to the

Calling-party-number before indicating it to the DTE.

• ATCN<> - Disable the national number prefix-adding function.

(Default)

NOTE: The angle brackets '<' and '>' are part of this command.

Disable inbound call connection

In some cases, the user may desire the TA to not answer any

incoming calls. This can be done by setting the bit 0 of S-register

S118:

• S118.0=0 - Enable the TA to answer a call (by default).

• S118.0=1 - Disable the TA to answer any call.

1 2 ... 95 96 97 98 99 100 101 102 103 104 105 ... 167 168

Žádné komentáře

ZyXEL ACCESSING INTERNET & INTRANET omni series Uživatelský manuál Strana 100